[ 0.000000] Linux version 2.6.26-rc3 (root@babar) (gcc version 4.2.3 (Debian 4.2.3-3)) #1 SMP Sat May 24 19:57:29 CEST 2008 [ 0.000000] Command line: root=/dev/mapper/babar-linux ro mem=4G break=mount [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786144) 1 entries of 3200 used [ 0.000000] max_pfn_mapped = 1048576 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F81B0, 0024 (r2 ATI ) [ 0.000000] ACPI: XSDT BFEE3100, 004C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP BFEE8440, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT BFEE3280, 5155 (r1 ATI ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS BFEE0000, 0040 [ 0.000000] ACPI: SSDT BFEE8680, 028A (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET BFEE8980, 0038 (r1 ATI ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG BFEE8A00, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC BFEE8580, 0084 (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-00000000bfee0000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786144) 1 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-00000000bfee0000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff] [ 0.000000] bootmap [000000000000d000 - 0000000000024fdf] pages 18 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-6d4c47] TEXT DATA BSS [ 0.000000] early res: 3 [35581000-37fefccf] RAMDISK [ 0.000000] early res: 4 [9f000-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-cfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe200029fffff] PMD -> [ffff810001200000-ffff810003bfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786144 [ 0.000000] On node 0 totalpages: 786047 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1343 pages reserved [ 0.000000] DMA zone: 2600 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 10692 pages used for memmap [ 0.000000] DMA32 zone: 771356 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:20100000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 38832 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4 [17180642.907074] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773956 [17180642.907074] Policy zone: DMA32 [17180642.907074] Kernel command line: root=/dev/mapper/babar-linux ro mem=4G break=mount [17180642.907074] Initializing CPU#0 [17180642.907074] PID hash table entries: 4096 (order: 12, 32768 bytes) [17180642.907074] TSC calibrated against PM_TIMER [17180642.907074] Marking TSC unstable due to TSCs unsynchronized [17180642.907074] time.c: Detected 2599.902 MHz processor. [17180642.907074] Console: colour VGA+ 80x25 [17180642.907074] console [tty0] enabled [17180642.907074] Checking aperture... [17180642.907074] Node 0: aperture @ 4000000 size 32 MB [17180642.907074] Aperture pointing to e820 RAM. Ignoring. [17180642.907074] No AGP bridge found [17180642.907074] Memory: 3052376k/3144576k available (2489k kernel code, 91812k reserved, 1371k data, 344k init) [17180642.907074] CPA: page pool initialized 1 of 1 pages preallocated [17180642.907074] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [17180642.907074] hpet clockevent registered [17180642.987080] Calibrating delay using timer specific routine.. 5203.64 BogoMIPS (lpj=10407296) [17180642.987167] Security Framework initialized [17180642.987205] SELinux: Disabled at boot. [17180642.987241] Capability LSM initialized [17180642.987521] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [17180642.989477] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [17180642.990439] Mount-cache hash table entries: 256 [17180642.990616] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17180642.990655] CPU: L2 Cache: 512K (64 bytes/line) [17180642.990690] CPU 0/0 -> Node 0 [17180642.990729] CPU: Physical Processor ID: 0 [17180642.990763] CPU: Processor Core ID: 0 [17180642.990815] ACPI: Core revision 20080321 [17180643.043082] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [17180643.043082] Using local APIC timer interrupts. [17180643.047082] APIC timer calibration result 12499512 [17180643.047082] Detected 12.499 MHz APIC timer. [17180643.047082] Booting processor 1/1 ip 6000 [17180643.054977] Initializing CPU#1 [17180643.054977] Calibrating delay using timer specific routine.. 5199.91 BogoMIPS (lpj=10399826) [17180643.054977] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17180643.054977] CPU: L2 Cache: 512K (64 bytes/line) [17180643.054977] CPU 1/1 -> Node 0 [17180643.054977] CPU: Physical Processor ID: 0 [17180643.054977] CPU: Processor Core ID: 1 [17180643.054977] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [17180643.135088] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [17180643.135088] Brought up 2 CPUs [17180643.135088] Total of 2 processors activated (10403.56 BogoMIPS). [17180643.135088] CPU0 attaching sched-domain: [17180643.135088] domain 0: span 0-1 [17180643.135088] groups: 0 1 [17180643.135088] domain 1: span 0-1 [17180643.135088] groups: 0-1 [17180643.135088] CPU1 attaching sched-domain: [17180643.135088] domain 0: span 0-1 [17180643.135088] groups: 1 0 [17180643.135088] domain 1: span 0-1 [17180643.135088] groups: 0-1 [17180643.135088] net_namespace: 1192 bytes [17180643.135088] NET: Registered protocol family 16 [17180643.135088] node 0 link 0: io port [c000, ffff] [17180643.135088] TOM: 00000000d0000000 aka 3328M [17180643.135088] node 0 link 0: mmio [a0000, bffff] [17180643.135088] node 0 link 0: mmio [d0000000, dfffffff] [17180643.135088] node 0 link 0: mmio [f0000000, fe02ffff] [17180643.135088] node 0 link 0: mmio [e0000000, e03fffff] [17180643.135088] TOM2: 0000000130000000 aka 4864M [17180643.135088] bus: [00,03] on node 0 link 0 [17180643.135088] bus: 00 index 0 io port: [0, ffff] [17180643.135088] bus: 00 index 1 mmio: [a0000, bffff] [17180643.135088] bus: 00 index 2 mmio: [d0000000, efffffff] [17180643.135088] bus: 00 index 3 mmio: [f0000000, ffffffff] [17180643.135088] bus: 00 index 4 mmio: [130000000, fcffffffff] [17180643.135088] ACPI: bus type pci registered [17180643.135088] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [17180643.135088] PCI: MCFG area at e0000000 reserved in E820 [17180643.142714] PCI: Using MMCONFIG at e0000000 - efffffff [17180643.142750] PCI: Using configuration type 1 for base access [17180643.143088] ACPI: EC: Look up EC in DSDT [17180643.147464] ACPI: Interpreter enabled [17180643.147464] ACPI: (supports S0 S1 S3 S4 S5) [17180643.147464] ACPI: Using IOAPIC for interrupt routing [17180643.151464] ACPI: PCI Root Bridge [PCI0] (0000:00) [17180643.155464] PCI: Transparent bridge - 0000:00:14.4 [17180643.155464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17180643.155464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [17180643.155464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [17180643.155464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17180643.175465] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.177760] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.178199] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.178637] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.179076] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.179514] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.179952] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [17180643.180328] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.181317] Linux Plug and Play Support v0.97 (c) Adam Belay [17180643.181317] pnp: PnP ACPI init [17180643.181317] ACPI: bus type pnp registered [17180643.185317] pnp: PnP ACPI: found 11 devices [17180643.185317] ACPI: ACPI bus type pnp unregistered [17180643.185317] PCI: Using ACPI for IRQ routing [17180643.199171] NET: Registered protocol family 8 [17180643.199205] NET: Registered protocol family 20 [17180643.201318] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [17180643.201318] hpet0: 4 32-bit timers, 14318180 Hz [17180643.203890] Switched to high resolution mode on CPU 0 [17180643.205617] Switched to high resolution mode on CPU 1 [17180643.215857] system 00:01: ioport range 0x4100-0x411f has been reserved [17180643.215893] system 00:01: ioport range 0x228-0x22f has been reserved [17180643.215928] system 00:01: ioport range 0x40b-0x40b has been reserved [17180643.215964] system 00:01: ioport range 0x4d6-0x4d6 has been reserved [17180643.215999] system 00:01: ioport range 0xc00-0xc01 has been reserved [17180643.216035] system 00:01: ioport range 0xc14-0xc14 has been reserved [17180643.216071] system 00:01: ioport range 0xc50-0xc52 has been reserved [17180643.216106] system 00:01: ioport range 0xc6c-0xc6d has been reserved [17180643.216141] system 00:01: ioport range 0xc6f-0xc6f has been reserved [17180643.216177] system 00:01: ioport range 0xcd0-0xcd1 has been reserved [17180643.216213] system 00:01: ioport range 0xcd2-0xcd3 has been reserved [17180643.216248] system 00:01: ioport range 0xcd4-0xcdf has been reserved [17180643.216284] system 00:01: ioport range 0x4000-0x40fe has been reserved [17180643.216320] system 00:01: ioport range 0x4210-0x4217 has been reserved [17180643.216361] system 00:01: ioport range 0xb10-0xb1f has been reserved [17180643.217806] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [17180643.218328] system 00:07: ioport range 0x220-0x225 has been reserved [17180643.218367] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [17180643.218409] system 00:0a: iomem range 0xcd600-0xcffff has been reserved [17180643.218445] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [17180643.218484] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [17180643.218522] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [17180643.218561] system 00:0a: iomem range 0xbfef0000-0xbffeffff could not be reserved [17180643.218600] system 00:0a: iomem range 0xfed00000-0xfed000ff could not be reserved [17180643.218639] system 00:0a: iomem range 0xbfee0000-0xbfefffff could not be reserved [17180643.218678] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved [17180643.218711] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [17180643.218711] system 00:0a: iomem range 0x100000-0xbfedffff could not be reserved [17180643.218711] system 00:0a: iomem range 0xbfff0000-0xcffeffff has been reserved [17180643.218711] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [17180643.218711] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [17180643.218711] system 00:0a: iomem range 0xfff80000-0xfffeffff could not be reserved [17180643.218711] PCI: Bridge: 0000:00:01.0 [17180643.218711] IO window: d000-dfff [17180643.218711] MEM window: 0xfda00000-0xfdbfffff [17180643.218711] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [17180643.218711] PCI: Bridge: 0000:00:07.0 [17180643.218711] IO window: e000-efff [17180643.218711] MEM window: 0xfdf00000-0xfdffffff [17180643.218711] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff [17180643.218711] PCI: Bridge: 0000:00:14.4 [17180643.218711] IO window: c000-cfff [17180643.218711] MEM window: 0xfde00000-0xfdefffff [17180643.218711] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff [17180643.218711] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17180643.218711] NET: Registered protocol family 2 [17180643.252075] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [17180643.255936] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [17180643.259927] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [17180643.260443] TCP: Hash tables configured (established 524288 bind 65536) [17180643.260481] TCP reno registered [17180643.270844] NET: Registered protocol family 1 [17180643.270961] checking if image is initramfs... it is [17180646.038923] Freeing initrd memory: 43451k freed [17180646.061671] audit: initializing netlink socket (disabled) [17180646.061671] type=2000 audit(1211740789.148:1): initialized [17180646.069672] VFS: Disk quotas dquot_6.5.1 [17180646.069672] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [17180646.069672] msgmni has been set to 6046 for ipc namespace ffffffff80597aa0 [17180646.069672] io scheduler noop registered [17180646.069672] io scheduler anticipatory registered [17180646.069672] io scheduler deadline registered [17180646.069672] io scheduler cfq registered (default) [17180646.304129] pci 0000:01:05.0: Boot video device [17180646.307570] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17180646.307570] assign_interrupt_mode Found MSI capability [17180646.307570] Allocate Port Service[0000:00:07.0:pcie00] [17180646.307570] Allocate Port Service[0000:00:07.0:pcie03] [17180646.339144] hpet_resources: 0xfed00000 is busy [17180646.339200] Linux agpgart interface v0.103 [17180646.339239] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17180646.344558] brd: module loaded [17180646.344558] input: Macintosh mouse button emulation as /class/input/input0 [17180646.344558] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [17180646.344558] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [17180646.344558] serio: i8042 KBD port at 0x60,0x64 irq 1 [17180646.368556] mice: PS/2 mouse device common for all mice [17180646.368556] cpuidle: using governor ladder [17180646.368556] cpuidle: using governor menu [17180646.368556] registered taskstats version 1 [17180646.368556] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [17180646.368556] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [17180646.368556] EDD information not available. [17180646.368556] Freeing unused kernel memory: 344k freed [17180646.384979] input: AT Translated Set 2 keyboard as /class/input/input1 [17180646.516563] ACPI: PNP0C0B:00 is registered as cooling_device0 [17180646.516563] ACPI: Fan [FAN] (on) [17180646.521235] ACPI: ACPI0007:00 is registered as cooling_device1 [17180646.521235] ACPI: ACPI0007:01 is registered as cooling_device2 [17180646.522283] ACPI: Expecting a [Reference] package element, found type 0 [17180646.524542] ACPI: LNXTHERM:01 is registered as thermal_zone0 [17180646.524704] ACPI: Thermal Zone [THRM] (40 C) [17180647.226563] No dock devices found. [17180647.249570] SCSI subsystem initialized [17180647.258565] usbcore: registered new interface driver usbfs [17180647.258565] usbcore: registered new interface driver hub [17180647.258866] Uniform Multi-Platform E-IDE driver [17180647.258909] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17180647.278004] usbcore: registered new device driver usb [17180647.366055] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [17180647.366115] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [17180647.366189] SB600_PATA: not 100% native mode: will probe irqs later [17180647.366230] ide0: BM-DMA at 0xf900-0xf907 [17180647.366269] Probing IDE interface ide0... [17180647.397280] libata version 3.00 loaded. [17180647.401989] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [17180648.102090] hda: _NEC DV-5700A, ATAPI CD/DVD-ROM drive [17180648.886079] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [17180648.941784] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17180648.941904] hda: UDMA/33 mode selected [17180648.942056] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17180648.942848] hdb: UDMA/33 mode selected [17180648.943347] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17180648.953985] ahci 0000:00:12.0: version 3.0 [17180648.953985] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [17180648.953985] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [17180648.953985] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [17180649.977257] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [17180649.977297] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [17180649.981213] scsi0 : ahci [17180649.981710] scsi1 : ahci [17180649.981710] scsi2 : ahci [17180649.981710] scsi3 : ahci [17180649.981710] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [17180649.981710] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [17180649.981710] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [17180649.981710] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [17180650.297236] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17180650.313213] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [17180650.313213] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [17180650.313213] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17180650.313213] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17180650.313213] ata1.00: configured for UDMA/133 [17180650.793234] ata2: SATA link down (SStatus 0 SControl 300) [17180651.431044] ata3: SATA link down (SStatus 0 SControl 300) [17180651.751046] ata4: SATA link down (SStatus 0 SControl 300) [17180651.754610] isa bounce pool size: 16 pages [17180651.754610] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [17180651.754610] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [17180651.754610] ohci_hcd 0000:00:13.0: OHCI Host Controller [17180651.754892] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 [17180651.754955] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [17180651.814202] usb usb1: configuration #1 chosen from 1 choice [17180651.814258] hub 1-0:1.0: USB hub found [17180651.814301] hub 1-0:1.0: 2 ports detected [17180651.918093] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [17180651.918093] ohci_hcd 0000:00:13.1: OHCI Host Controller [17180651.918093] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 [17180651.918093] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [17180651.974589] usb usb2: configuration #1 chosen from 1 choice [17180651.974589] hub 2-0:1.0: USB hub found [17180651.974589] hub 2-0:1.0: 2 ports detected [17180652.078092] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [17180652.078092] ohci_hcd 0000:00:13.2: OHCI Host Controller [17180652.078092] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 [17180652.078092] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [17180652.169679] usb usb3: configuration #1 chosen from 1 choice [17180652.169734] hub 3-0:1.0: USB hub found [17180652.169775] hub 3-0:1.0: 2 ports detected [17180652.293550] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [17180652.293550] ohci_hcd 0000:00:13.3: OHCI Host Controller [17180652.293550] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 [17180652.293550] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [17180652.304424] hda: ATAPI 40X DVD-ROM drive, 256kB Cache [17180652.304424] Uniform CD-ROM driver Revision: 3.20 [17180652.308422] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [17180652.351171] usb usb4: configuration #1 chosen from 1 choice [17180652.351236] hub 4-0:1.0: USB hub found [17180652.351280] hub 4-0:1.0: 2 ports detected [17180652.394013] usb 2-1: new low speed USB device using ohci_hcd and address 2 [17180652.458905] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [17180652.458905] ohci_hcd 0000:00:13.4: OHCI Host Controller [17180652.458905] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 [17180652.458905] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [17180652.515009] usb usb5: configuration #1 chosen from 1 choice [17180652.515065] hub 5-0:1.0: USB hub found [17180652.515109] hub 5-0:1.0: 2 ports detected [17180652.563994] usb 2-1: configuration #1 chosen from 1 choice [17180652.614987] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [17180652.615064] ehci_hcd 0000:00:13.5: EHCI Host Controller [17180652.615119] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 [17180652.615193] ehci_hcd 0000:00:13.5: debug port 1 [17180652.615243] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [17180652.615316] usb 2-1: USB disconnect, address 2 [17180652.627414] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17180652.627528] usb usb6: configuration #1 chosen from 1 choice [17180652.627580] hub 6-0:1.0: USB hub found [17180652.627620] hub 6-0:1.0: 10 ports detected [17180652.730971] r8169 Gigabit Ethernet driver 2.2LK loaded [17180652.730971] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [17180652.730971] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17180652.730971] eth0: RTL8168b/8111b at 0xffffc2000063e000, 00:1d:60:2c:fe:06, XID 38000000 IRQ 510 [17180652.798853] Driver 'sd' needs updating - please use bus_type methods [17180652.798853] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [17180652.798853] sd 0:0:0:0: [sda] Write Protect is off [17180652.798853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17180652.798853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17180652.798853] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [17180652.798853] sd 0:0:0:0: [sda] Write Protect is off [17180652.798853] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17180652.798853] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17180652.798853] sda: sda1 sda2 [17180652.844653] sd 0:0:0:0: [sda] Attached SCSI disk [17180652.967619] hub 6-0:1.0: unable to enumerate USB device on port 3 [17180652.967709] usbcore: registered new interface driver hiddev [17180653.233875] usb 2-1: new low speed USB device using ohci_hcd and address 3 [17180653.396859] usb 2-1: configuration #1 chosen from 1 choice [17180653.411157] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [17180653.473886] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1 [17180653.474055] usbcore: registered new interface driver usbhid [17180653.474091] usbhid: v2.6:USB HID core driver [17180669.871525] device-mapper: uevent: version 1.0.3 [17180669.875686] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [17181080.339763] PM: Syncing filesystems ... done. [17181080.339763] PM: Preparing system for mem sleep [17181080.339763] Freezing user space processes ... (elapsed 0.00 seconds) done. [17181080.339763] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [17181080.339763] PM: Entering mem sleep [17181080.339763] Suspending console(s) [17181080.483761] sd 0:0:0:0: [sda] Synchronizing SCSI cache [17181080.484188] sd 0:0:0:0: [sda] Stopping disk [17181081.382877] ACPI handle has no context! [17181081.382941] ACPI handle has no context! [17181081.382954] ACPI handle has no context! [17181081.398912] ACPI: PCI interrupt for device 0000:00:13.5 disabled [17181081.414768] ACPI: PCI interrupt for device 0000:00:13.4 disabled [17181081.414797] ACPI: PCI interrupt for device 0000:00:13.3 disabled [17181081.414825] ACPI: PCI interrupt for device 0000:00:13.2 disabled [17181081.414854] ACPI: PCI interrupt for device 0000:00:13.1 disabled [17181081.414882] ACPI: PCI interrupt for device 0000:00:13.0 disabled [17181081.483251] ACPI: PCI interrupt for device 0000:00:12.0 disabled [17181081.495367] ACPI: Preparing to enter system sleep state S3 [17181081.495460] Disabling non-boot CPUs ... [17181081.495470] CPU0 attaching NULL sched-domain. [17181081.495472] CPU1 attaching NULL sched-domain. [17181081.607227] CPU 1 is now offline [17181081.607230] SMP alternatives: switching to UP code [17181081.611586] CPU0 attaching sched-domain: [17181081.611589] domain 0: span 0 [17181081.611590] groups: 0 [17181081.611741] CPU1 is down [17181081.611741] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [17181081.611920] Back to C! [17181081.612310] Enabling non-boot CPUs ... [17181081.612390] CPU0 attaching NULL sched-domain. [17181081.623696] SMP alternatives: switching to SMP code [17181081.627990] Booting processor 1/1 ip 6000 [17181081.635571] Initializing CPU#1 [17181081.635571] Calibrating delay using timer specific routine.. 5199.82 BogoMIPS (lpj=10399652) [17181081.635571] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17181081.635571] CPU: L2 Cache: 512K (64 bytes/line) [17181081.635571] CPU 1/1 -> Node 0 [17181081.635571] CPU: Physical Processor ID: 0 [17181081.635571] CPU: Processor Core ID: 1 [17181081.635571] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [17181081.715720] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [17181081.715763] CPU0 attaching sched-domain: [17181081.715765] domain 0: span 0-1 [17181081.715766] groups: 0 1 [17181081.715768] domain 1: span 0-1 [17181081.715769] groups: 0-1 [17181081.715772] CPU1 attaching sched-domain: [17181081.715773] domain 0: span 0-1 [17181081.715774] groups: 1 0 [17181081.715776] domain 1: span 0-1 [17181081.715777] groups: 0-1 [17181081.740573] Switched to high resolution mode on CPU 1 [17181081.740657] CPU1 is up [17181081.740907] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181081.740915] PM: Writing back config space on device 0000:00:00.0 at offset 3 (was 0, writing 4000) [17181081.740939] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was 100007, writing 100407) [17181081.740951] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17181081.755111] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [17181082.759155] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [17181082.783074] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [17181082.807077] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [17181082.831076] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [17181082.855076] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [17181082.895075] ehci_hcd 0000:00:13.5: enabling device (0000 -> 0002) [17181082.895078] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [17181082.895106] PM: Writing back config space on device 0000:00:13.5 at offset 3 (was 4008, writing 4010) [17181082.895111] PM: Writing back config space on device 0000:00:13.5 at offset 1 (was 2b00006, writing 2b00017) [17181082.895176] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [17181082.911090] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10a) [17181082.911104] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 4, writing fdfff004) [17181082.911109] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 1, writing ee01) [17181082.911114] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 10) [17181082.911119] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 100000, writing 100407) [17181082.911067] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17181082.911067] hda: UDMA/33 mode selected [17181082.943068] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17181082.943398] hdb: UDMA/33 mode selected [17181082.943971] sd 0:0:0:0: [sda] Starting disk [17181083.077273] ata3: SATA link down (SStatus 0 SControl 300) [17181083.077305] ata2: SATA link down (SStatus 0 SControl 300) [17181083.077325] ata4: SATA link down (SStatus 0 SControl 300) [17181088.117252] ata1: link is slow to respond, please be patient (ready=0) [17181089.405263] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17181089.427564] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17181089.429500] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17181089.429502] ata1.00: configured for UDMA/133 [17181089.429546] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [17181089.429559] sd 0:0:0:0: [sda] Write Protect is off [17181089.429561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17181089.429583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17181089.629515] PM: Finishing wakeup. [17181089.629517] Restarting tasks ... <6>usb 2-1: USB disconnect, address 3 [17181089.633832] done. [17181089.786844] usb 2-1: new low speed USB device using ohci_hcd and address 4 [17181089.964616] usb 2-1: configuration #1 chosen from 1 choice [17181089.978053] input: Logitech USB-PS/2 Optical Mouse as /class/input/input3 [17181089.996064] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1 [17181380.694410] PM: Starting manual resume from disk [17181380.694410] PM: Resume from partition 254:1 [17181380.694410] PM: Checking hibernation image. [17181380.706611] PM: Resume from disk failed. [17181380.717789] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [17181380.717796] PM: Basic memory bitmaps created [17181380.730618] PM: Basic memory bitmaps freed [17181382.886223] input: PC Speaker as /class/input/input4 [17181382.981917] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17181383.047068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17181383.105661] input: Power Button (FF) as /class/input/input5 [17181383.157989] ACPI: Power Button (FF) [PWRF] [17181383.160070] input: Power Button (CM) as /class/input/input6 [17181383.165789] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [17181383.222088] ACPI: Power Button (CM) [PWRB] [17181383.755143] Adding 4194296k swap on /dev/mapper/babar-swap. Priority:-1 extents:1 across:4194296k [17181384.105238] it87: Found IT8716F chip at 0x228, revision 1 [17181384.105238] it87: in3 is VCC (+5V) [17181384.105238] it87: in7 is VCCH (+5V Stand-By) [17181391.238477] fuse init (API version 7.9) [17181391.486899] kjournald starting. Commit interval 5 seconds [17181391.486899] EXT3 FS on dm-2, internal journal [17181391.490949] EXT3-fs: mounted filesystem with ordered data mode. [17181391.730497] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [17181391.730902] SGI XFS Quota Management subsystem [17181391.746899] Filesystem "dm-4": Disabling barriers, not supported by the underlying device [17181391.766899] XFS mounting filesystem dm-4 [17181391.796015] Ending clean XFS mount for filesystem: dm-4 [17181391.985834] ReiserFS: dm-3: found reiserfs format "3.6" with standard journal [17181391.985884] ReiserFS: dm-3: using ordered data mode [17181391.991498] ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [17181391.991893] ReiserFS: dm-3: checking transaction log (dm-3) [17181392.007046] ReiserFS: dm-3: Using r5 hash to sort names [17181392.031891] kjournald starting. Commit interval 5 seconds [17181392.031891] EXT3 FS on sda1, internal journal [17181392.031891] EXT3-fs: mounted filesystem with ordered data mode. [17181392.758867] r8169: eth0: link up [17181392.761684] r8169: eth0: link up [17181393.857765] NET: Registered protocol family 17 [17181395.147407] NET: Registered protocol family 10 [17181395.148206] lo: Disabled Privacy Extensions [17181395.346242] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [17181395.435808] ip_tables: (C) 2000-2006 Netfilter Core Team [17181397.240737] RPC: Registered udp transport module. [17181397.240737] RPC: Registered tcp transport module. [17181398.859459] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use) [17181404.540999] lp: driver loaded but no devices found [17181404.594567] ppdev: user-space parallel port driver [17181405.764175] eth0: no IPv6 routers present [17181405.946142] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [17181405.998140] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [17181406.002052] NFSD: starting 90-second grace period [17181411.067464] Bluetooth: Core ver 2.11 [17181411.067464] NET: Registered protocol family 31 [17181411.067464] Bluetooth: HCI device and connection manager initialized [17181411.067464] Bluetooth: HCI socket layer initialized [17181411.097925] Bluetooth: L2CAP ver 2.9 [17181411.097925] Bluetooth: L2CAP socket layer initialized [17181411.465305] Bluetooth: RFCOMM socket layer initialized [17181411.465305] Bluetooth: RFCOMM TTY layer initialized [17181411.465305] Bluetooth: RFCOMM ver 1.8 [17181411.562513] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181411.654615] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181411.654615] ACPI Exception (thermal-0462): AE_ERROR, ACPI thermal trip point state changed [17181411.654615] Please send acpidump to linux-acpi@vger.kernel.org [17181411.654615] [20080321] [17181411.654615] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181413.489851] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181415.660758] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181417.687824] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181419.955302] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181421.968184] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181423.990716] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181426.241025] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181428.371442] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181430.397122] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181432.439393] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181434.458806] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181436.481069] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181438.494207] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181440.520855] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181442.536009] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181444.609651] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181446.685876] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181448.740415] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181450.748191] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181452.813820] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181454.837389] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181456.847136] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181458.886718] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181460.911228] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181462.923022] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181464.977110] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181467.018745] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181469.028966] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181471.076709] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181473.099851] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181475.125861] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181477.190290] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181479.243682] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181481.475156] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181483.742899] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181486.140522] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181488.425704] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181490.688214] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181492.716535] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181494.846238] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off' [17181496.914050] ACPI: Unable to turn cooling device [ffff8100bf808e20] 'off'