[ 0.000000] Linux version 2.6.26-rc3 (root@babar) (gcc version 4.2.3 (Debian 4.2.3-3)) #1 SMP Sat May 24 19:57:29 CEST 2008 [ 0.000000] Command line: root=/dev/mapper/babar-linux ro [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786144) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1245184 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP 000F81B0, 0024 (r2 ATI ) [ 0.000000] ACPI: XSDT BFEE3100, 004C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP BFEE8440, 00F4 (r3 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT BFEE3280, 5155 (r1 ATI ASUSACPI 1000 MSFT 3000000) [ 0.000000] ACPI: FACS BFEE0000, 0040 [ 0.000000] ACPI: SSDT BFEE8680, 028A (r1 PTLTD POWERNOW 1 LTP 1) [ 0.000000] ACPI: HPET BFEE8980, 0038 (r1 ATI ASUSACPI 42302E31 AWRD 98) [ 0.000000] ACPI: MCFG BFEE8A00, 003C (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] ACPI: APIC BFEE8580, 0084 (r1 ATI ASUSACPI 42302E31 AWRD 0) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 786144) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff] [ 0.000000] bootmap [000000000000e000 - 0000000000033fff] pages 26 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-6d4c47] TEXT DATA BSS [ 0.000000] early res: 3 [35581000-37fefccf] RAMDISK [ 0.000000] early res: 4 [9f000-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe20003bfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ 0.000000] [ffffe20003c00000-ffffe200043fffff] PMD -> [ffff81000c000000-ffff81000c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1245184 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 786144 [ 0.000000] 0: 1048576 -> 1245184 [ 0.000000] On node 0 totalpages: 982655 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1344 pages reserved [ 0.000000] DMA zone: 2599 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31 [ 0.000000] Normal zone: 2688 pages used for memmap [ 0.000000] Normal zone: 193920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ATI board detected. Disabling timer routing over 8254. [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8200 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000 [ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000 [ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000 [ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: bff00000:20100000) [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] PERCPU: Allocating 38832 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4 [17180642.907074] Built 1 zonelists in Node order, mobility grouping on. Total pages: 964287 [17180642.907074] Policy zone: Normal [17180642.907074] Kernel command line: root=/dev/mapper/babar-linux ro [17180642.907074] Initializing CPU#0 [17180642.907074] PID hash table entries: 4096 (order: 12, 32768 bytes) [17180642.907074] TSC calibrated against PM_TIMER [17180642.907074] Marking TSC unstable due to TSCs unsynchronized [17180642.907074] time.c: Detected 2599.894 MHz processor. [17180642.907074] Console: colour VGA+ 80x25 [17180642.907074] console [tty0] enabled [17180642.907074] Checking aperture... [17180642.907074] Node 0: aperture @ 4000000 size 32 MB [17180642.907074] Aperture pointing to e820 RAM. Ignoring. [17180642.907074] No AGP bridge found [17180642.907074] Your BIOS doesn't leave a aperture memory hole [17180642.907074] Please enable the IOMMU option in the BIOS setup [17180642.907074] This costs you 64 MB of RAM [17180642.907074] Mapping aperture over 65536 KB of RAM @ 4000000 [17180642.907074] PM: Registered nosave memory: 0000000004000000 - 0000000008000000 [17180642.907074] Memory: 3760952k/4980736k available (2489k kernel code, 169668k reserved, 1371k data, 344k init) [17180642.907074] CPA: page pool initialized 1 of 1 pages preallocated [17180642.907074] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [17180642.907074] hpet clockevent registered [17180642.987080] Calibrating delay using timer specific routine.. 5203.59 BogoMIPS (lpj=10407198) [17180642.987167] Security Framework initialized [17180642.987205] SELinux: Disabled at boot. [17180642.987241] Capability LSM initialized [17180642.987521] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [17180642.989473] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [17180642.990430] Mount-cache hash table entries: 256 [17180642.990606] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17180642.990645] CPU: L2 Cache: 512K (64 bytes/line) [17180642.990679] CPU 0/0 -> Node 0 [17180642.990719] CPU: Physical Processor ID: 0 [17180642.990753] CPU: Processor Core ID: 0 [17180642.990805] ACPI: Core revision 20080321 [17180643.043082] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [17180643.043082] Using local APIC timer interrupts. [17180643.047082] APIC timer calibration result 12499479 [17180643.047082] Detected 12.499 MHz APIC timer. [17180643.047208] Booting processor 1/1 ip 6000 [17180643.055103] Initializing CPU#1 [17180643.055103] Calibrating delay using timer specific routine.. 5199.80 BogoMIPS (lpj=10399616) [17180643.055103] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [17180643.055103] CPU: L2 Cache: 512K (64 bytes/line) [17180643.055103] CPU 1/1 -> Node 0 [17180643.055103] CPU: Physical Processor ID: 0 [17180643.055103] CPU: Processor Core ID: 1 [17180643.055103] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [17180643.135430] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping 02 [17180643.135806] Brought up 2 CPUs [17180643.135841] Total of 2 processors activated (10403.40 BogoMIPS). [17180643.135980] CPU0 attaching sched-domain: [17180643.135982] domain 0: span 0-1 [17180643.135984] groups: 0 1 [17180643.135986] domain 1: span 0-1 [17180643.135988] groups: 0-1 [17180643.135991] CPU1 attaching sched-domain: [17180643.135992] domain 0: span 0-1 [17180643.135993] groups: 1 0 [17180643.135995] domain 1: span 0-1 [17180643.135997] groups: 0-1 [17180643.139088] net_namespace: 1192 bytes [17180643.139088] NET: Registered protocol family 16 [17180643.139088] node 0 link 0: io port [c000, ffff] [17180643.139088] TOM: 00000000d0000000 aka 3328M [17180643.139088] node 0 link 0: mmio [a0000, bffff] [17180643.139088] node 0 link 0: mmio [d0000000, dfffffff] [17180643.139088] node 0 link 0: mmio [f0000000, fe02ffff] [17180643.139088] node 0 link 0: mmio [e0000000, e03fffff] [17180643.139088] TOM2: 0000000130000000 aka 4864M [17180643.139088] bus: [00,03] on node 0 link 0 [17180643.139088] bus: 00 index 0 io port: [0, ffff] [17180643.139088] bus: 00 index 1 mmio: [a0000, bffff] [17180643.139088] bus: 00 index 2 mmio: [d0000000, efffffff] [17180643.139088] bus: 00 index 3 mmio: [f0000000, ffffffff] [17180643.139088] bus: 00 index 4 mmio: [130000000, fcffffffff] [17180643.139088] ACPI: bus type pci registered [17180643.139088] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [17180643.139088] PCI: MCFG area at e0000000 reserved in E820 [17180643.146713] PCI: Using MMCONFIG at e0000000 - efffffff [17180643.146750] PCI: Using configuration type 1 for base access [17180643.147089] ACPI: EC: Look up EC in DSDT [17180643.151482] ACPI: Interpreter enabled [17180643.151482] ACPI: (supports S0 S1 S3 S4 S5) [17180643.151482] ACPI: Using IOAPIC for interrupt routing [17180643.155482] ACPI: PCI Root Bridge [PCI0] (0000:00) [17180643.157623] PCI: Transparent bridge - 0000:00:14.4 [17180643.157676] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [17180643.157935] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [17180643.158053] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] [17180643.158126] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [17180643.180726] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.180726] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.181166] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.182776] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.183213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.183650] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.184087] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11) [17180643.184462] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. [17180643.185482] Linux Plug and Play Support v0.97 (c) Adam Belay [17180643.185807] pnp: PnP ACPI init [17180643.185847] ACPI: bus type pnp registered [17180643.187892] pnp: PnP ACPI: found 11 devices [17180643.187928] ACPI: ACPI bus type pnp unregistered [17180643.189902] PCI: Using ACPI for IRQ routing [17180643.204480] NET: Registered protocol family 8 [17180643.204514] NET: Registered protocol family 20 [17180643.205903] PCI-DMA: Disabling AGP. [17180643.205903] PCI-DMA: aperture base @ 4000000 size 65536 KB [17180643.205903] PCI-DMA: using GART IOMMU. [17180643.205903] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [17180643.205903] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [17180643.205903] hpet0: 4 32-bit timers, 14318180 Hz [17180643.207300] Switched to high resolution mode on CPU 0 [17180643.210201] Switched to high resolution mode on CPU 1 [17180643.219276] system 00:01: ioport range 0x4100-0x411f has been reserved [17180643.219313] system 00:01: ioport range 0x228-0x22f has been reserved [17180643.219348] system 00:01: ioport range 0x40b-0x40b has been reserved [17180643.219384] system 00:01: ioport range 0x4d6-0x4d6 has been reserved [17180643.219419] system 00:01: ioport range 0xc00-0xc01 has been reserved [17180643.219454] system 00:01: ioport range 0xc14-0xc14 has been reserved [17180643.219490] system 00:01: ioport range 0xc50-0xc52 has been reserved [17180643.219525] system 00:01: ioport range 0xc6c-0xc6d has been reserved [17180643.219560] system 00:01: ioport range 0xc6f-0xc6f has been reserved [17180643.219596] system 00:01: ioport range 0xcd0-0xcd1 has been reserved [17180643.219631] system 00:01: ioport range 0xcd2-0xcd3 has been reserved [17180643.219666] system 00:01: ioport range 0xcd4-0xcdf has been reserved [17180643.219701] system 00:01: ioport range 0x4000-0x40fe has been reserved [17180643.219740] system 00:01: ioport range 0x4210-0x4217 has been reserved [17180643.222390] system 00:01: ioport range 0xb10-0xb1f has been reserved [17180643.222432] system 00:07: ioport range 0x4d0-0x4d1 has been reserved [17180643.222468] system 00:07: ioport range 0x220-0x225 has been reserved [17180643.222508] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [17180643.222551] system 00:0a: iomem range 0xcd600-0xcffff has been reserved [17180643.222587] system 00:0a: iomem range 0xf0000-0xf7fff could not be reserved [17180643.222625] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved [17180643.222663] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved [17180643.222702] system 00:0a: iomem range 0xbfef0000-0xbffeffff could not be reserved [17180643.222741] system 00:0a: iomem range 0xfed00000-0xfed000ff could not be reserved [17180643.222779] system 00:0a: iomem range 0xbfee0000-0xbfefffff could not be reserved [17180643.222819] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved [17180643.222858] system 00:0a: iomem range 0x0-0x9ffff could not be reserved [17180643.222894] system 00:0a: iomem range 0x100000-0xbfedffff could not be reserved [17180643.222932] system 00:0a: iomem range 0xbfff0000-0xcffeffff has been reserved [17180643.222972] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [17180643.223010] system 00:0a: iomem range 0xfee00000-0xfee00fff could not be reserved [17180643.223050] system 00:0a: iomem range 0xfff80000-0xfffeffff could not be reserved [17180643.224502] PCI: Bridge: 0000:00:01.0 [17180643.224502] IO window: d000-dfff [17180643.224502] MEM window: 0xfda00000-0xfdbfffff [17180643.224502] PREFETCH window: 0x00000000d0000000-0x00000000dfffffff [17180643.224502] PCI: Bridge: 0000:00:07.0 [17180643.224502] IO window: e000-efff [17180643.224502] MEM window: 0xfdf00000-0xfdffffff [17180643.224502] PREFETCH window: 0x00000000fdc00000-0x00000000fdcfffff [17180643.224502] PCI: Bridge: 0000:00:14.4 [17180643.224502] IO window: c000-cfff [17180643.224502] MEM window: 0xfde00000-0xfdefffff [17180643.224502] PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff [17180643.224502] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17180643.224502] NET: Registered protocol family 2 [17180643.258197] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [17180643.260985] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [17180643.264976] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [17180643.265497] TCP: Hash tables configured (established 524288 bind 65536) [17180643.265534] TCP reno registered [17180643.276071] NET: Registered protocol family 1 [17180643.276187] checking if image is initramfs... it is [17180646.044750] Freeing initrd memory: 43451k freed [17180646.066436] audit: initializing netlink socket (disabled) [17180646.066436] type=2000 audit(1211746340.152:1): initialized [17180646.074435] VFS: Disk quotas dquot_6.5.1 [17180646.074435] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [17180646.074435] msgmni has been set to 7430 for ipc namespace ffffffff80597aa0 [17180646.074435] io scheduler noop registered [17180646.074435] io scheduler anticipatory registered [17180646.074435] io scheduler deadline registered [17180646.074435] io scheduler cfq registered (default) [17180646.306992] pci 0000:01:05.0: Boot video device [17180646.310436] PCI: Setting latency timer of device 0000:00:07.0 to 64 [17180646.310436] assign_interrupt_mode Found MSI capability [17180646.310436] Allocate Port Service[0000:00:07.0:pcie00] [17180646.310436] Allocate Port Service[0000:00:07.0:pcie03] [17180646.343465] hpet_resources: 0xfed00000 is busy [17180646.343465] Linux agpgart interface v0.103 [17180646.343465] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [17180646.347457] brd: module loaded [17180646.347457] input: Macintosh mouse button emulation as /class/input/input0 [17180646.347457] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [17180646.347457] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [17180646.347457] serio: i8042 KBD port at 0x60,0x64 irq 1 [17180646.367439] mice: PS/2 mouse device common for all mice [17180646.367439] cpuidle: using governor ladder [17180646.367439] cpuidle: using governor menu [17180646.367794] registered taskstats version 1 [17180646.367794] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [17180646.367794] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [17180646.367794] EDD information not available. [17180646.367794] Freeing unused kernel memory: 344k freed [17180646.392309] input: AT Translated Set 2 keyboard as /class/input/input1 [17180646.515331] ACPI: PNP0C0B:00 is registered as cooling_device0 [17180646.515331] ACPI: Fan [FAN] (on) [17180646.520057] ACPI: ACPI0007:00 is registered as cooling_device1 [17180646.520057] ACPI: ACPI0007:01 is registered as cooling_device2 [17180646.520058] ACPI: Expecting a [Reference] package element, found type 0 [17180646.520058] ACPI: LNXTHERM:01 is registered as thermal_zone0 [17180646.520058] ACPI: Thermal Zone [THRM] (40 C) [17180647.272354] usbcore: registered new interface driver usbfs [17180647.272354] usbcore: registered new interface driver hub [17180647.280355] No dock devices found. [17180647.292438] usbcore: registered new device driver usb [17180647.356372] SCSI subsystem initialized [17180647.368355] ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 [17180647.368355] ehci_hcd 0000:00:13.5: EHCI Host Controller [17180647.368355] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [17180647.368355] ehci_hcd 0000:00:13.5: debug port 1 [17180647.368412] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 [17180647.372386] libata version 3.00 loaded. [17180647.373950] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver [17180647.380356] Uniform Multi-Platform E-IDE driver [17180647.380356] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [17180647.380996] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [17180647.381136] usb usb1: configuration #1 chosen from 1 choice [17180647.384357] hub 1-0:1.0: USB hub found [17180647.384357] hub 1-0:1.0: 10 ports detected [17180647.480926] ahci 0000:00:12.0: version 3.0 [17180647.480954] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 [17180647.481045] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [17180647.481083] ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP [17180647.672253] hub 1-0:1.0: unable to enumerate USB device on port 3 [17180648.488779] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [17180648.488820] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part [17180648.492735] scsi0 : ahci [17180648.492735] scsi1 : ahci [17180648.492735] scsi2 : ahci [17180648.492735] scsi3 : ahci [17180648.492735] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 [17180648.492735] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 [17180648.492735] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 [17180648.492735] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 [17180648.836262] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [17180648.856239] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-12, max UDMA7 [17180648.856239] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32) [17180648.856239] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17180648.856239] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [17180648.856239] ata1.00: configured for UDMA/133 [17180649.176259] ata2: SATA link down (SStatus 0 SControl 300) [17180649.496258] ata3: SATA link down (SStatus 0 SControl 300) [17180649.816257] ata4: SATA link down (SStatus 0 SControl 300) [17180649.816241] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5 [17180649.816241] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 [17180649.816241] ohci_hcd 0000:00:13.0: OHCI Host Controller [17180649.816241] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [17180649.816241] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 [17180649.908325] usb usb2: configuration #1 chosen from 1 choice [17180649.908382] hub 2-0:1.0: USB hub found [17180649.908424] hub 2-0:1.0: 2 ports detected [17180650.012313] ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 [17180650.012388] ohci_hcd 0000:00:13.1: OHCI Host Controller [17180650.012438] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [17180650.012491] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 [17180650.072311] usb usb3: configuration #1 chosen from 1 choice [17180650.072364] hub 3-0:1.0: USB hub found [17180650.072404] hub 3-0:1.0: 2 ports detected [17180650.184315] ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 [17180650.184389] ohci_hcd 0000:00:13.2: OHCI Host Controller [17180650.184439] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [17180650.184491] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 [17180650.244314] usb usb4: configuration #1 chosen from 1 choice [17180650.244366] hub 4-0:1.0: USB hub found [17180650.244407] hub 4-0:1.0: 2 ports detected [17180650.355879] ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 [17180650.355879] ohci_hcd 0000:00:13.3: OHCI Host Controller [17180650.355879] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [17180650.355879] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 [17180650.419409] usb usb5: configuration #1 chosen from 1 choice [17180650.419464] hub 5-0:1.0: USB hub found [17180650.419505] hub 5-0:1.0: 2 ports detected [17180650.463333] usb 3-1: new low speed USB device using ohci_hcd and address 2 [17180650.526991] ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 [17180650.527066] ohci_hcd 0000:00:13.4: OHCI Host Controller [17180650.527116] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [17180650.527164] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 [17180650.607002] usb usb6: configuration #1 chosen from 1 choice [17180650.607055] hub 6-0:1.0: USB hub found [17180650.607096] hub 6-0:1.0: 2 ports detected [17180650.661413] usb 3-1: configuration #1 chosen from 1 choice [17180650.723881] SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1 [17180650.723929] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 [17180650.724008] SB600_PATA: not 100% native mode: will probe irqs later [17180650.724050] ide0: BM-DMA at 0xf900-0xf907 [17180650.724088] Probing IDE interface ide0... [17180651.477386] hda: _NEC DV-5700A, ATAPI CD/DVD-ROM drive [17180652.964879] hdb: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive [17180653.020582] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17180653.020711] hda: UDMA/33 mode selected [17180653.020863] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [17180653.021656] hdb: UDMA/33 mode selected [17180653.022154] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [17180653.158744] r8169 Gigabit Ethernet driver 2.2LK loaded [17180653.158802] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19 [17180653.158884] PCI: Setting latency timer of device 0000:02:00.0 to 64 [17180653.159143] eth0: RTL8168b/8111b at 0xffffc2000063e000, 00:1d:60:2c:fe:06, XID 38000000 IRQ 510 [17180653.171815] Driver 'sd' needs updating - please use bus_type methods [17180653.171815] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [17180653.171815] sd 0:0:0:0: [sda] Write Protect is off [17180653.171815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17180653.171815] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17180653.171815] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB) [17180653.171815] sd 0:0:0:0: [sda] Write Protect is off [17180653.171815] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [17180653.171815] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [17180653.171815] sda: sda1 sda2 [17180653.183572] sd 0:0:0:0: [sda] Attached SCSI disk [17180653.194684] hda: ATAPI 40X DVD-ROM drive, 256kB Cache [17180653.194840] Uniform CD-ROM driver Revision: 3.20 [17180653.207815] hdb: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache [17180653.243815] usbcore: registered new interface driver hiddev [17180653.252111] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2 [17180653.279864] input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:13.1-1 [17180653.280379] usbcore: registered new interface driver usbhid [17180653.281418] usbhid: v2.6:USB HID core driver [17180653.490933] device-mapper: uevent: version 1.0.3 [17180653.490933] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [17180653.643393] PM: Starting manual resume from disk [17180653.643393] PM: Resume from partition 254:1 [17180653.643393] PM: Checking hibernation image. [17180653.663392] PM: Resume from disk failed. [17180653.671410] PM: Marking nosave pages: 000000000009f000 - 0000000000100000 [17180653.671410] PM: Marking nosave pages: 00000000bfee0000 - 0000000100000000 [17180653.672161] PM: Marking nosave pages: 0000000004000000 - 0000000008000000 [17180653.672399] PM: Basic memory bitmaps created [17180653.688038] PM: Basic memory bitmaps freed [17180655.946637] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [17180656.033714] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [17180656.102718] input: PC Speaker as /class/input/input3 [17180656.130858] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device [17180656.145731] input: Power Button (FF) as /class/input/input4 [17180656.233843] ACPI: Power Button (FF) [PWRF] [17180656.233928] input: Power Button (CM) as /class/input/input5 [17180656.299617] ACPI: Power Button (CM) [PWRB] [17180656.782619] Adding 4194296k swap on /dev/mapper/babar-swap. Priority:-1 extents:1 across:4194296k [17180657.119097] it87: Found IT8716F chip at 0x228, revision 1 [17180657.119097] it87: in3 is VCC (+5V) [17180657.119097] it87: in7 is VCCH (+5V Stand-By) [17180665.275931] fuse init (API version 7.9) [17180665.523034] kjournald starting. Commit interval 5 seconds [17180665.523226] EXT3 FS on dm-2, internal journal [17180665.523292] EXT3-fs: mounted filesystem with ordered data mode. [17180665.745847] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [17180665.762371] SGI XFS Quota Management subsystem [17180665.778856] Filesystem "dm-4": Disabling barriers, not supported by the underlying device [17180665.801622] XFS mounting filesystem dm-4 [17180665.814857] Ending clean XFS mount for filesystem: dm-4 [17180665.995873] ReiserFS: dm-3: found reiserfs format "3.6" with standard journal [17180665.995922] ReiserFS: dm-3: using ordered data mode [17180666.001557] ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [17180666.002549] ReiserFS: dm-3: checking transaction log (dm-3) [17180666.008989] ReiserFS: dm-3: Using r5 hash to sort names [17180666.044978] kjournald starting. Commit interval 5 seconds [17180666.044978] EXT3 FS on sda1, internal journal [17180666.044978] EXT3-fs: mounted filesystem with ordered data mode. [17180666.779181] r8169: eth0: link up [17180668.105748] NET: Registered protocol family 17 [17180668.941366] NET: Registered protocol family 10 [17180668.941725] lo: Disabled Privacy Extensions [17180669.130996] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [17180669.217722] ip_tables: (C) 2000-2006 Netfilter Core Team [17180671.071434] RPC: Registered udp transport module. [17180671.071434] RPC: Registered tcp transport module. [17180672.702098] warning: `dnsmasq' uses 32-bit capabilities (legacy support in use) [17180678.345436] lp: driver loaded but no devices found [17180678.401442] ppdev: user-space parallel port driver [17180679.288141] eth0: no IPv6 routers present [17180679.813602] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [17180679.879769] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [17180679.884508] NFSD: starting 90-second grace period [17180684.688934] Bluetooth: Core ver 2.11 [17180684.689622] NET: Registered protocol family 31 [17180684.689664] Bluetooth: HCI device and connection manager initialized [17180684.689702] Bluetooth: HCI socket layer initialized [17180684.718803] Bluetooth: L2CAP ver 2.9 [17180684.718803] Bluetooth: L2CAP socket layer initialized [17180685.121393] Bluetooth: RFCOMM socket layer initialized [17180685.121393] Bluetooth: RFCOMM TTY layer initialized [17180685.121393] Bluetooth: RFCOMM ver 1.8 [17180685.315204] ACPI Exception (thermal-0462): AE_ERROR, ACPI thermal trip point state changed [17180685.315243] Please send acpidump to linux-acpi@vger.kernel.org [17180685.315314] [20080321]